Multichannel MEMS Optical Switch(OPTICO MEMS Switch Series)
Compared with the traditional mechanical optical switch, MEMS optical switch has the characteristics of small size, small polarization loss and high power consumption. At the same time, the mechanical optical switch has the advantages of low insertion loss, low crosstalk, low polarization sensitivity, high extinction ratio, high switching speed, small size and easy large-scale integration.
Optical Path Diagram
Product specification
| Item | Specification | ||
| Wavelength Range(nm) | 850±20 MM | 1400~1700 MM | 1310±20/1550±20/1625±20 MM |
| Testing wavelength(nm) | 850 MM | 1550 MM | 1310/1550 MM |
| Insertion loss(dB) | 0.8(TYP) 1.0(MAX)N≤8 1.0（TYP) 1.6(MAX)N≤1.6 | 0.8(TYP) 1.0(MAX)N≤8 1.0（TYP) 1.5(MAX)N≤16 | |
| Return loss(dB) | MM≥25 | SM≥40 | |
| Crosstalk(dB) | MM≥30 | SM≥45 | |
| PDL(dB) | ≤0.15 | ||
| WDL(dB） | ≤0.3 | ||
| TDL(dB) | ≤0.25 | ||
| Repeatability(dB) | ≤0.1 | ||
| Life（cycles0 | ≥109 | ||
| Switching time(ms) | ≤20 N≤8， ≤30 N≤16 | ||
| Max Optical Power(mW) | ≤500 | ||
| Operating voltage(V) | 5±0.2 | ||
| Operating Temperature(℃） | -40~+85 | ||
| Relative humidity(%） | 5~95% | ||
| Dimension(mm） | TYPE: B(L)65x(W)24.7x(H)11 | ||
Pin Definition
| Pin | Name | Description | I/O | Specification | Unit |
| 1 | NC | Not Connected | |||
| 2 | VCC | Power Supply | IN | 5±0.2 | VDC |
| 3 | /STROBE | Strobe signal, Falling Edge Active | IN | LVTTL | |
| 4 | GND | Ground | IN | LVTTL | |
| 5 | D0 | Data0 Input | IN | LVTTL | |
| 6 | D1 | Data1 Input | IN | LVTTL | |
| 7 | D2 | Data2 Input | IN | ||
| 8 | NC | Note Connected | |||
| 9 | TXD | UART transmit | OUT | LVTTL | |
| 10 | RXD | UART receive | IN | LVTTL | |
| 11 | GND | Ground | IN | ||
| 12 | NC | Not Connected | |||
| 13 | D3 | Data3 Input | IN | LVTTL | |
| 14 | /RESET | Hardware Reset, Logic low active | IN | LVTTL |
Features
•Low insertion loss
•Wide wavelength range
•low channel crosstalk
•High stability, high reliability
•Perfectly used in metropolitan area network, laboratory research and development, system testing, dynamic configuration add-drop multiplexing.
maq per Qat: multichannel mems optical switch, China, manufacturers, suppliers, factory, wholesale, customized
| Item | Specification | ||
| Wavelength Range(nm) | 850±20 MM | 1400~1700 MM | 1310±20/1550±20/1625±20 MM |
| Testing wavelength(nm) | 850 MM | 1550 MM | 1310/1550 MM |
| Insertion loss(dB) | 0.8(TYP) 1.0(MAX)N≤8 1.0（TYP) 1.6(MAX)N≤1.6 | 0.8(TYP) 1.0(MAX)N≤8 1.0（TYP) 1.5(MAX)N≤16 | |
| Return loss(dB) | MM≥25 | SM≥40 | |
| Crosstalk(dB) | MM≥30 | SM≥45 | |
| PDL(dB) | ≤0.15 | ||
| WDL(dB） | ≤0.3 | ||
| TDL(dB) | ≤0.25 | ||
| Repeatability(dB) | ≤0.1 | ||
| Life（cycles0 | ≥109 | ||
| Switching time(ms) | ≤20 N≤8， ≤30 N≤16 | ||
| Max Optical Power(mW) | ≤500 | ||
| Operating voltage(V) | 5±0.2 | ||
| Operating Temperature(℃） | -40~+85 | ||
| Relative humidity(%） | 5~95% | ||
| Dimension(mm） | TYPE: B(L)65x(W)24.7x(H)11 | ||
Pin Definition
| Pin | Name | Description | I/O | Specification | Unit |
| 1 | NC | Not Connected | |||
| 2 | VCC | Power Supply | IN | 5±0.2 | VDC |
| 3 | /STROBE | Strobe signal, Falling Edge Active | IN | LVTTL | |
| 4 | GND | Ground | IN | LVTTL | |
| 5 | D0 | Data0 Input | IN | LVTTL | |
| 6 | D1 | Data1 Input | IN | LVTTL | |
| 7 | D2 | Data2 Input | IN | ||
| 8 | NC | Note Connected | |||
| 9 | TXD | UART transmit | OUT | LVTTL | |
| 10 | RXD | UART receive | IN | LVTTL | |
| 11 | GND | Ground | IN | ||
| 12 | NC | Not Connected | |||
| 13 | D3 | Data3 Input | IN | LVTTL | |
| 14 | /RESET | Hardware Reset, Logic low active | IN | LVTTL |
